120KW Digital Induction Forging Furnace 1-15KHZ Automatic Hot Forging Machine

DSP-M-120KW Digital Medium Frequency Induction Forging Furnace Automatic Hot Forging

Technical Parameters:

Main Characteristic:
1. Using the Cylinder to push th workpiece size, auto-Matic Feeding system, improve the produce speed and produce efficiency.
2. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.
Visual Human-computer Interface makes the operator feel more intimate and intuitive.
3. Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically)
4.There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.
1). Manual, On and stop in the Switch
2). Fixed Timer, setting heating time, after reach the heating time, then stop.
3). Fixed Temperature: Set the heating temperature that we need it, when the reach to the temperature that we need it, then stop the machine.
4). Constant Temperature: Adjust the heating power automatic to keep the same temperature to the workpiece.
5). Section Heating model, there are 8(S1-S8) options, each section can set the heating power, timer, temperature or constant temperature, temperature or constant temperature just can choose any one. Power as 0 means no need to heat, put the Paramater that you need to set, if not choose that function then show"--
5.This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.
6. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
7. 100% Duty cycle, continuous working is allowed at maximum power output.
8. Simple to install, Installation can be done by unprofessional person very easily;
9. Energy Saving Up to 20-30% compare with SCR machine.

Application:
1.Hot Forging For Bolt
2.Hot Forging For Steel Bar, Iron Bar
3.Hot Foring For Copper,Brass, Bronze's bar, Plate, Bolt

Advantage of Compare the SCR Parallel induction heating machine:
1. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type

2. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.
3. Easy to Using, no need adjust the main board, no need to adjust capacitor's connection when you want to work other workpiece.

4. After we debug the machine in our company, then you can use it directly. Very convenient.

5. Digital type machine, frequency, power, current can shows in the touch screen, easy to control the machine and see the working efficiency.

6. More stable performance.

7. Water Pressure and water Temperature Meter in the machine.

120KW Digital Induction Forging Furnace

Digital Induction Forging Furnace 15KHZ

15KHZ Automatic Hot Forging Machine

120KW Digital Induction Forging Furnace 1-15KHZ Automatic Hot Forging Machine Images